|
|
|
|
|
|
|
|
|
|
|
|
|
- Card reader with weather-proof and IP66-compliant housing
- Wiegand interface supported
- RS-485 output: 9,600 bps, connect up to 8 GV-DFR1352 units
- 13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
|
- Card reader with weather-proof and IP66-compliant housing
- Wiegand interface supported
- RS-485 output: 9,600 bps, connect up to 8 GV-R1352 units
- 13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
|
- Access control card and PIN code recognition
- Wiegand and RS-485 interfaces
- OSDP communication through RS-485
- 13.56 MHz ISO 14443A
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Card reader with keypad
- Identification card and PIN code recognition
- Weather-proof and IP66-compliant housing (for outdoor use)
- RS-485 output: 9,600 bps, connect up to 8 GV-RK1352 units
|
GV-CS1320 is an access controller with a 2 MP camera and 13.56 MHz reader built in. GV-CS1320 recognizes access control cards and accordingly grants access to up to 100,000 users. Its camera captures a live view of the entrance and transmits it to the access control system GV-ASManager over a network, eliminating the need to install and maintain a separate camera.
For the operator to communicate with visitors at the door installed with GV-CS1320 and grant access, three types of notifications are available: SIP/VoIP Calling, GV-ASNotify PC program, and GV-Access mobile app.
When the touchpad on the GV-CS1320 is activated, it will make a VoIP call to the operator, allowing the operator to communicate with the visitor and enter an access code to unlock the door.
|
Built-in antenna and RF moduleEffective identification with specially designed antenna patternCompatible with access controller using Wiegand 64 interfaceIdeal sensing range within 10 m (32.8 ft)
|
|
|
