|
|
|
|
|
|
|
|
|
|
|
|
|
|
GV-POEX0100 is a single-port, 10/100 PoE extender that can extend the distance between a PoE switch and a GV-IP Camera by 100 m (328.08 ft) for every extender installed. They can be serially connected, with no additional power supply, to transmit power and data to a GV-IP Camera as far as up to 600 meters (1968.5 ft) away from a PoE switch.
|
- High Power Over Ethernet (Max. 90 W)
- DC 56V, 1.6A (Max. 90 W)
- Max. 100 m (328 ft) from GV-PA901 to IP device, Cat5e cable
- -10 °C ~ 50 °C (14 °F ~ 122 °F)
|
GV‐PA903BT is a Gigabit PoE (Power over Ethernet) adapter. The adapter supports the IEEE802.3af/at/bt Power over Ethernet standard, with a maximum power output of 95 W over a single Ethernet cable. You can mount an IP camera anywhere in a building where power outlets are scarce by using the PoE adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Power over Coaxial Cable Extender Transmitter / Receiver is a 1-port 10/100BaseT(X) PoE / PoE+ PD and 1-port BNC PoE over Coaxial Extender Transmitter / Receiver. It is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 230 m / 754 ft (RG11), 180 m / 590 ft (RG6), or 100 m / 328 ft (RG59) into PoE IP camera.
|
- 8-port 10/100BaseTX, PSE plus 2-port Gigabit Uplink (1xTP, 1xSFP)
- IEEE 802.3at Compliant (8 Ports at Full 15.4 W)
- Web-based Configuration and Management
- Max. 130 W power consumption
- Up to 8 GV-IP Cameras support
|
- 8-Port 10/100/1000BaseTX, PoE+ with 2 SFP Open Slots
- IEEE 802.3at Compliant (8 Ports at Full 15.4 W)
- Up to 9.6 KB Jumbo Frame
- Web-based Configuration and Management
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- 16-Port 10/100BaseTX, PoE+ plus 2-Port Gigabit Copper/SFP Combo Uplink Port
- IEEE 802.3at Compliant (16 Ports at Full 15.4 W)
- Max. 250 W power consumption
- 19" Rack mount
- Up to 16 GV-IP Cameras support
|
16-Port 10/100/1000BaseTX, PoE+ with 4 SFP Combo Uplink Ports
IEEE 802.3at Compliant (16 Ports at Full 15.4 W)
Max. 250 W power consumption
Up to 15 GV-IP Cameras support
|
- 24-Port 10/100BaseTX PoE+ plus 2-Port Gigabit Copper/SFP Combo Uplink Port
- IEEE 802.3at Compliant (24 Ports at Full 15.4 W)
- Max. 400 W power consumption
- 19" Rack-mount
- Up to 24 GV-IP Cameras support
|
|
|
|
|
|
|
|
|
|
|
|
- 24-Port 10/100/1000BaseTX PoE+ with 4 Combo Uplink Ports
- IEEE 802.3at Compliant (24 Ports at Full 15.4 W)
- Web-based Configuration and Management
- Up to 23 GV-IP Cameras support
|
|
|
